Firstly, chemical etching decorative products is one of the most popular materials for reinforcing concrete (from reinforcement and wire rod), plaster, as well as for creating cages and aviaries for poultry and fur farms.
Secondly, etched products are etched from durable alloy steels. The products sizes of etched products are small. The grid applies at the industrial enterprises, in construction. This type of products is also good to use for drying grains in granaries.
The chemical etching decorative products is a product made using steel wire. Outwardly, it resembles a etched fabric. Such rolled products can have cells of different sizes and shapes, which determines the scope of use. For example, the material can be good to use for:
We specialize in the implementation of the most popular metal products; however, our customers can order any others with direct delivery from the manufacturer. At the moment we offer a network:
There are different types of metal fences, each of them has unique characteristics and design to best express itself in certain contexts of use. In this article we offer you a complete picture of the different types of chemical etching decorative products available on the market, focusing on their characteristics.
First of all, it is good to distinguish between loose products and electro-etched ones. Let's see them in detail.
As well as, loose products nets can knot or twisted. These are typically flexible nets, recommended in the case of uneven ground or slopes and differences in height; it can also install on low walls and flat land. Its use is mainly aimed at etching agricultural land and farms.
Of course, the processing, the diameter and the coating of the threads strongly influence the performance of the chemical etching decorative products nets in terms of safety, solidity and resistance over time.
Moreover, there are numerous loose knit models characterizes by heterogeneous designs, differentiated knits, zinc and PVC coatings.
The chemical etching decorative products of the wires ensures high levels of resistance and safety to these nets. They are suitable for installation in flat areas and in combination with a concrete wall. Their rigidity, on the other hand, makes installation in steep or wooded areas difficult.
As mentioned, in ours
Catalog
In addition, both loose knit and electro-etched models are available, design and manufacture for different uses and contexts.
At this point it is good to make a further distinction between metal products marketed in rolls and those in panels. We see below the relative characteristics.
Subsequently, it can be with loose or electro- chemical etching decorative products and characterizes by wires with a diameter that typically ranges from 2 to 3.5 millimeters, such as to allow the products to be wound on itself. The rolls typically have a length of 25, 50 or 100 meters.
Furthermore, some specific types of nets are also available in rolls of 10 meters, so as to meet even those who need a few meters of netting. The roll nets are also available in different heights, from 60 cm to 2.5 meters and over. Naturally, during the installation of chemical etching decorative products it will be necessary to cut the network on the basis of the define project.
The nets in panels are exclusively electro-etched and have wires with a diameter greater than those in rolls, thus making it advisable to pack them in panels.
The latter are modular and have variable center distances. Also in this case, during the design phase it will be possible to cut them where necessary to perfectly comply with the measures define by the project. Given the rigidity of their structure, they best express on flat ground and in combination with a retaining wall.
Eventually, the wide range of chemical etching decorative products designs and finishes present in ours Catalog
Makes them suitable for application in residential, industrial and sports contexts.
As always, the raw materials good to use and the processes carries out play a role of fundamental importance and determine the quality of the threads and nets and their resistance over time. Precisely in this regard, we underline the importance of the wire coating, typically in zinc and PVC.
Cavatorta develop over the years some exclusive wire coating technologies which briefly describe below.
Exclusive strong and hot galvanizing process that ensures excellent resistance to corrosion thanks to a homogeneous and uniform zinc coating, higher than the minimum required by European standards and characterizes by perfect anchoring, such as not to crack even in cases of bending.
Exclusive coating process with an alloy of zinc (95%) and aluminum (5%) that offers the wire extraordinary resistance to corrosion and catholic protection against cuts and abrasions.
There are various types of chemical etching decorative products on the market, as each of them offers particular characteristics capable of satisfying the most diverse needs.
In addition, this type of wire products is made through a crossing of weft and warp threads which will then etch in the area of the junction points through an electrical process from which they take their name.
Lastly, this type of chemical etching decorative products can be available in panels or rolls according to the required dimensions, and can be good to use in various ways.
The most good to use are the nets suitable for fences, those good to use to make cages, those that have a comparison in construction or carpentry, those good to use for machine tools or safety barriers or good to use in the production of beds and sofas.
