This cleaning must be done periodically, to avoid having unhealthy air in the car when driving even for a long time. In addition, those with dust allergies or hay fever may find it helpful to have a dust filter in excellent condition to prevent these allergens from entering the car. With this cleaning strategy, with Photo chemical etching is also possible to remove germs and bacteria that are dangerous to health.
Clean the car air conditioning dust filter: see if it is worn. Before cleaning the dust filter, it is important to understand if it is worth it or if it is better to change the filter directly with a new one. A worn filter is evident: it is corroded in several places and does not filter anything. Other typical signs that the filter needs to be changed are:
If it's been a long time since you changed it, then it's worth changing your filter. In theory, every 15 thousand kilometers, it is necessary to change the dust filter of the car. You can ask a mechanic to do it, or go DIY. In the car documents, there is the instruction booklet with all the instructions to follow for this operation to clean Photo chemical etching.
Each car model has its own characteristics and the appropriate arrangements for this operation. For the filter, it is advisable to bring the old one and contact a dealer specialized in car accessories, to have a filter that is certainly compatible with your car.
The filter can be found behind the hood panel on the bulkhead, at the top end under the hood. Alternatively, it comes inside the air conditioner. Just follow the instruction booklet to find out where it is.
If the Photo chemical etching is not worn, you can proceed to the actual cleaning. Unfortunately, grandmother's remedies cannot be used, but a suitable filter sheet spray must be used. In fact, using do-it-yourself products can be a serious risk to the functioning of the filter after cleaning. For the car, these filter sheets may have tubes, to reach even the most difficult points.
Once the filter has been removed and the filter sheet used, follow the instructions on the product packaging. Usually, it is left to dry and washed again; before cleaning it and putting it back dry in its place in the car. It can be cleaned with a clean white cloth.
The filter sheet has a variable cost depending on the company, but does not exceed 15 euros in general. Once used, it can be stored in a dry and clean place, out of the reach of children. Once the filter is in place, the car is held open to ventilate the car. These are always very strong products.
Photo chemical etching cleaning can be done once every 2 weeks if you are allergic to dust, or once a month. Spring is the best time to change the dust filter.
If the filter is clean, but the car's air conditioner is not working, the refrigerant gas may have run out. The gas must be refilled by a mechanic, ideally every 2-4 years, or depending on the kilometers traveled. The cabin filter, also known as a dust filter, is an essential element of the vehicle: it filters the air coming from the outside.
The filters of the air, in fact, are a perfect environment for molds. The hot-humid temperature inside them facilitates the proliferation of bacteria, which are subsequently released into the environment by the air conditioner.
Being linked to many processes inside the cabin, the signs of a worn dust hepa filter sheet can be many and even different. Usually, the first indicator of dust filter damage is a stale odor in the car, possibly aggravated by deterioration in the performance of the heater and blower.
Other possible symptoms of a breakdown are increased fuel consumption and condensation on the windows, due to water particles entering the passenger compartment from the outside air .
Acting preventively and independently to take care of the health of your car is always advisable. A good habit to improve the health of the passenger compartment could be the use of sprays or foams to be applied on the filter according to the manufacturer's instructions and which would help sanitize the system.
Furthermore, the sanitization of the filter could also be carried out with a vacuum cleaner or with pressurized air. Both procedures would remove some of the dirt, however without reaching the deeper layers.
Photo chemical etching work to filter dirt out of the engine. But you must pay attention to the allowed limit to avoid filter saturation. When it is in a saturation state, it consumes more fuel and causes damage to the driver.
If the loss of excessive consumption was not enough, when the filter is saturated there is also a much greater release of gases into the atmosphere, further polluting the environment.
The oil filter acts in two parts: inside and outside the vehicle. But how so? It works as a cleaner of impurities caused by friction between parts and combustion.
It is necessary to be aware of the functioning of these filters, when they are not in their best condition. Moreover, it ends up generating greater wear on parts such as pistons, cylinders, rings and valves. Thus, their useful life ends up decreasing and generating more expenses. It could have been avoided only with the proper verification of the oil filter.
In order for it to do its job, the Photo chemical etching inspection should be regularly included in routine car maintenance practices. It is always advisable to leave this in the hands of a professional. He will evaluate any damage.
In some cases, it may be sufficient to proceed with sanitization with ozone, which is able to neutralize 99.98% of bacteria and allergens and eliminate unwanted odors .
