Tea Infusers strainers is a novel structure, small size, simple and flexible operation, energy-saving, efficient, closed work, adaptable multi-purpose filter equipment.
Its application areas:
1. (NF), ultrafiltration (UF), reverse osmosis (RO), electronic membrane deionization system Tea Infusers&strainers.
2. Medicine injection, infusion, eye drops, Chinese herbal medicine liquid and other filtration, biological agents extraction, purification, concentration.
3. Electronics, microelectronics, semiconductor industry with high purity water pre-filtration.
4. Oil field water injection, boiler feed water, chemical reagents, liquid organic products, high purity chemicals, pesticide drugs and other filtration.
5. Drinking pure water, mineral water, fruit juice, tea drinks, health drinks filter.
6. Liquor, wine, beer, rice wine and other fruit wine filter, pure draft beer sterilization filter (instead of pasteurization).
7. Production and living wastewater treatment and pretreatment in the process of recycle water recycling or Tea Infusers&strainersing.
8. Other such as biological engineering, oil refining, printing and dyeing, textile industry, water and wastewater treatment, scientific research and filtration.
Its characteristics: large flow, long life, filtration effect is obvious, high filtration strength, high mechanical strength, simple operation, cost savings.
Bag filter products to filter bags are divided into single bag, double bag, multi-bag, with liquid flow into side into the type, side into the top; conventional side of the side and side Into the bottom out.
The safety filter (also known as the precision filter) is generally provided before the pressure vessel to remove fine particles of 1 degree or more of turbidity to meet the requirements of the subsequent process for water; sometimes also at the end of the entire water treatment system, Prevent fine particles (such as broken resin) into the finished water. Most of the stainless steel shell, the internal filter filter (such as PP cotton), mainly used in multi-media pretreatment filter, reverse osmosis, ultrafiltration membrane filtration equipment before. (Such as tiny quartz sand, activated carbon particles, etc.) to ensure that the water quality filtration accuracy and protective film filter elements are not damaged by large particles. Precision filter device built-in filter filter accuracy level can be divided into 0.5μs, 1μs, 5μs, 10μs, etc., according to different occasions to use different filtering accuracy to ensure that the water after the accuracy and guarantee the safety of the late membrane components.
Using PP cotton, nylon, meltblown and other different materials for the filter, remove the water in the small suspended matter, bacteria and other impurities, so that the raw water quality to reverse osmosis membrane water requirements.
Filter can be made of a variety of materials to meet the needs of a variety of fluid filtration. Small size, large filtration area, low resistance, long service life and purpose In order to prevent the pretreatment failed to completely remove or newly generated suspended particles into the reverse osmosis system to protect the high pressure pump and reverse osmosis membrane, usually in reverse osmosis Set the filter type safety filter before entering the water. Generally use the aperture is less than 10um, according to the actual design can be designed as 5um or less.
Common filter type filter material mainly sintered filter, melt blown fiber filter and honeycomb filter and so on. Sintered tube is formed by sintering the powder material, the filter tube material is ceramic, glass sand, plastic and so on. Fusible fiber filter is generally used polypropylene as raw material, after heating and melting, spraying, traction, receiving and forming made of polypropylene as raw material PP filter is more commonly used. Honeycomb filter is made of textile fiber roving precision winding on the porous skeleton, polypropylene wire around the honeycomb type filter more commonly used.
1. Filtration amount T / H: 0.05-20.
2. Filter using pressure mpa: 0.1-0.6.
3. Filter specifications core number: 1,3,5,7,9,11,13,15.
4. Filter Operating Temperature ° C: 5-55.
5. (PTFE) filter, polyamide film (HE) filter, polypropylene film (PP) filter, cellulose acetate membrane (CN-CA) filter.
6. Filtration precision from 0.1-60um, length 10; 20; 30 and 40 inches (ie 250; 500; 750; 1000mm) four.
7. The filter, the pressure is 0.42mpa, can be recoil. There are two types of plug-in (222,226) and flat mouth.
1. The machine is small in size, light in weight, easy to use, large filter area, low plugging rate, fast filtration, no pollution, good thermal stability and good chemical stability.
2. This filter can filter the vast majority of particles, so widely used in fine filtration and sterilization process.
3. Cartridge can be equipped with a 1 core, 3 core, 5 core, 7 core, 9 core, 11 core, 13 core, 15 core.
4. Folding filter length of 10,20,30,40 inches.
5. Filter material polytetraethylene, polysulfone, nylon, polypropylene, acetate fiber.
6. Filter pore size: 0.1um, 0.22um, 1um, 3um, 5um, 10um, and so on.
7. Also divided into hydrophobic (for gas) and hydrophilic (for days liquid) filter, can be selected according to need.
8. Precision filter mainly include PA PE microporous precision filter, titanium rod filter, polyether sulfone filter, PTFE filter, microporous membrane tube filter.
For more information, please contact us for consultation.
